産業廃棄物管理票住所印刷(積替用) byNSDev

● OverviewIndustrial waste management slip (manifest slip) It is an application that prints the address for transshipment.You can print items such as name, address, and phone number.You dont have to handwrite the same content over and over again.****************************● Preparation and settingPrepare a serial printer (code system 201PL or ESC / P compatible model) connected to the network. (See below for compatible printers)(Be careful when purchasing a new product.)Connect the smartphone or tablet with this app installed to the same network as the printer.Set the printers TCP / IP for this app. (Check the connection with Ping.)(Please consult your system administrator for Android device, printer, and network settings. Our support will be charged.)****************************● How to use1. Enter the name and address you want to print.2. Execute printing from the menu.3. Printing will start after the advertisement is displayed.****************************● FunctionYou can register your name, address, and phone number, call them, and enter them easily.You can adjust the print position (left margin, top margin).****************************● Operation check printer model (our operation check printer)○ Connect the printer server corega FP Server II to NEC MultiImpact 700LX2 with a parallel port○ Connect the printer server corega FP Server II to EPSON VP-4300 with a parallel port○ EPSON VP-4300N****************************● Printer model that will workIt is assumed that the manifest slip you are using is a physically printable printer.□ NECMultiImpact 700EXMultiImpact 700JAMultiImpact 700JEMultiImpact 700JENMultiImpact 700JXMultiImpact 700JX2MultiImpact 700JX3MultiImpact 700LAMultiImpact 700LEMultiImpact 700LXMultiImpact 700XAMultiImpact 700XEMultiImpact 700XENMultiImpact 700XXMultiImpact 700XX2Multi Impact seriesPC-PR201 seriesAll printers with control code "201PL"□ EPSONVP-5200NVP-6200NAll printers with control code "ESC / P"□ Other manufacturers○ Printers that support "201PL" as the control code○ Printers that support "ESC / P" as the control code****************************● Printer serverSince the connection is confirmed with Ping, the model that responds to PingModels that support the TCP port number 9100 with the RAW protocol****************************● CautionSome environment-dependent characters cannot be printed depending on the printer used.The characters that can be printed are numbers, alphabets, half-width kana symbols, and JIS first and second level kanji.Printers that do not support the width of the manifest slip cannot physically print.A printer whose printer does not support the number of copies of the manifest slip cannot physically print.□ When using an NEC printer○ In [Printer Settings], specify [Printer Control Code] as [201PL (NEC)].○ Specify 8-bit data for "7 / 8-bit data switching" of the internal memory switch of the printer.□ When using an EPSON printer○ In [Printer Settings], specify [Printer Control Code] as [EPC / P System (EPSON, etc.)].○ Specify the off setting for the printers ESC / P supermarket.□ When using a printer from another manufacturer○ If the control code is 201PL, specify [Printer Control Code] as [201PL (NEC)] in [Printer Settings].○ If the control code is ESC / P, specify [EPC / P system (EPSON, etc.)] for [Printer control code] in [Printer settings].